Self-cleaning air filter (matching centrifugal compressor)
1. The filter is suitable for a wide range of air humidity and can operate normally in humid and foggy areas;
2. The filter has high filtration efficiency, low resistance loss and low power consumption; components can be replaced without stopping the machine;
3. The dust cleaning structure adopts pulse jet type, without moving parts, reliable operation and low maintenance cost;
4. The air filtration capacity design: more than 2 times the rated processing capacity of the air compressor.
Raw air compressor (centrifugal & screw type)
1. Centrifugal compressor, high compression efficiency, good reliability, low energy consumption, aftercooler;
2. Screw compressor, equipped with high-efficiency filter for oil removal, dust removal and impurity removal;
Constant pressure control, adjust the air volume within the maximum possible range, with anti-surge operation, automatic pressure control, impeller vibration alarm interlocking and other protection measures.
Screw Type
Centrifugal Type
Air precooling unit
1. Imported compressor, safe and reliable; using surrounding refrigerant, refrigerant will not leak;
2. Using high-quality refrigeration components, the equipment can run continuously all year round and has a long service life;
3. Efficient steam-water separator and high-quality automatic drain valve to ensure that the outlet air is free of free water;
4. Using advanced energy regulator to ensure that the compressor has no concerns about frequent startup;
5. Equipped with complete alarm interlocking protection device to prevent moisture from entering the molecular sieve, safer and more reliable.
Air purification system
1. The design of the molecular sieve purifier adopts a "double-layer bed" structure, so that before the air enters the molecular sieve bed, the moisture is adsorbed by the activated alumina, protecting the molecular sieve and allowing the molecular sieve to fully exert its ability to adsorb CO2 and CnHm. The purifier can remove the CO2 content in the air to 1ppm, while also reducing the regeneration temperature and regeneration energy consumption, and increasing the service life of the molecular sieve; (small air separation unit uses a single-layer bed structure)
2. An airflow uniform distribution device is set up, which has a long service life, saves investment, and reduces energy consumption;
3. Design and calculation are carried out in accordance with the specifications of "Steel Pressure Vessels".
For any oxygen/nitrogen/argon needs, please reach out to us ：
Emma Lv Tel./Whatsapp/Wechat：+86-15268513609
Email：Emma.Lv@fankeintra.com
Post time: Apr-22-2025