HANGZHOU NUZHUO TECHNOLOGY GROUP CO.,LTD.

Recently, when using PSA oxygen generators, one should be aware of the following: As many areas enter the spring rainy season, the continuous high humidity weather not only affects daily life but also poses new challenges for the stable operation of PSA oxygen equipment. Industry experts remind that if a large amount of moisture from humid air enters the oxygen generation system, it may directly affect the working efficiency of the core components of the equipment. Users need to enhance their awareness of protection.

During the operation of the PSA oxygen generator, molecular sieves are the key material for separating nitrogen and oxygen. However, especially during the rainy season in spring when the air humidity is extremely high, if the humid air is not adequately dried before entering the adsorption tower, it may cause the molecular sieve particles to stick together due to water absorption. This phenomenon will disrupt the uniform distribution of the adsorbent, reducing its specific surface area, and subsequently leading to decreased oxygen generation efficiency, unstable oxygen production concentration, and in severe cases, the need to shut down the machine and replace the molecular sieves, thereby affecting normal operation.

Nuzhuo suggests that users enhance the maintenance of the PSA oxygen generator:

1.Firstly, enhance the air treatment at the front end. Install high-efficiency refrigeration type dryers or adsorption type dryers before the equipment’s air intake, and regularly inspect the drainage system to ensure that the air entering the main unit has a dew point that meets the standards. This way, the risk of moisture intrusion can be significantly reduced at the source.

2.Secondly, regularly check the status of the filters. During the rainy season, there is an increase in suspended moisture and impurities in the air. The replacement frequency of the precision filter elements should be appropriately increased to prevent the filter elements from getting clogged, which could lead to poor air flow or water penetration.

3.Again, pay attention to the operating environment of the equipment. Try to place the oxygen generator in a well-ventilated and relatively dry indoor space. Avoid placing it directly in a damp basement or outdoor area. If conditions permit, a dehumidifier can be equipped to maintain the environmental humidity within a reasonable range.

4.Finally, establish a seasonal inspection mechanism. It is recommended that users contact professional technicians before and after the rainy season to conduct a comprehensive inspection of the equipment, with a particular focus on the pressure difference changes in the molecular sieve bed layer and the oxygen production concentration data. This will help promptly identify and eliminate potential hazards.

Through the above scientific care and standardized operations, the PSA oxygen generator can maintain efficient and stable operation throughout the rainy season, continuously providing reliable gas support to users in various industries, and ensuring the safety of production and gas usage.

For any oxygen/nitrogen/Argon needs, please reach out to us ：

Lyan.Ji Tel./Whatsapp/Wechat:+86-18069835230

Email :lyan.ji@hznuzhuo.com